Sherco confirms ultra-limited EnduroGP Replica models for Australia
Sherco Australia has confirmed local availability for the MY26 EnduroGP Replica range, with just 15 motorcycles allocated nationally across the two-model line-up.

The Australian allocation comprises 10 examples of the 300 SE EnduroGP Replica associated with Steve Holcombe and five examples of the 300 SEF EnduroGP Replica associated with Hamish Macdonald. Sherco says the models are intended as direct replicas of its EnduroGP competition bikes rather than the usual race-themed special editions, with worldwide production capped at 100 units for the two-stroke and 40 for the four-stroke. Each machine also carries a numbered frame sticker and comes with a signed collector replica jersey matched to its build number.

A major point of difference is the suspension package. Both bikes are fitted with a KYB semi-factory Kashima-coated fork with DLC-coated tubes and a KYB semi-factory rear shock with triple adjustment and a DLC-coated shaft. Sherco describes those as competition-derived components not previously offered on one of its production enduro models.

The rest of the specification is similarly focused, with both replicas featuring CNC-machined blue 4GD hubs, reinforced spokes, factory CNC-machined blue anodised triple clamps, a Galfer 270 mm front brake disc with relocation bracket, Galfer rear disc, factory CNC-machined footpegs, SCAR handlebar, a specific competition seat, Polisport handguards and EnduroGP graphics with rider number plates.

The 300 SE EnduroGP Replica is powered by a 293 cc single-cylinder two-stroke engine with electronic control valve and booster, fed by a Keihin PWK 36 carburettor. Sherco lists a SPES chromed exhaust pipe and Akrapovič titanium silencer, along with a 10-litre fuel tank.

The 300 SEF EnduroGP Replica uses Sherco’s 304 cc DOHC four-stroke single with Synerject electronic injection. Its spec sheet lists a full Akrapovič exhaust system with a titanium header and a 9.8-litre fuel tank.

Shared chassis details include a semi-perimetric high-strength chrome-molybdenum steel frame, Brembo hydraulic brakes, Michelin Enduro tyres on black anodised Excel rims, a 1480 mm wheelbase, 355 mm ground clearance and a 950 mm seat height.

Sherco Australia has confirmed pricing at $22,999 plus ORC for the 300 SE EnduroGP Replica and $24,499 plus ORC for the 300 SEF EnduroGP Replica. Local stock is due in August 2026, with orders to be finalised through authorised Sherco dealers on a first-come, first-served basis.

With only 15 bikes allocated nationally, the EnduroGP Replica range is likely to appeal not only to committed enduro riders but also to Sherco enthusiasts drawn to the rarity and factory-spec focus of the release.

It would be almost a shame to get them dirty, but it would also be criminal not to…
2026 Sherco EnduroGP Replica Specifications
Key differences and shared specifications
Key differences
Single-cylinder 2-stroke with electronic control valve and booster
4-stroke DOHC, 4-valve Sherco technology
293.14 cc
303.68 cc
72 x 72 mm
84 x 54.80 mm
Keihin PWK 36 carburettor
Synerject electronic injection
SPES chromed exhaust pipe and Akrapovič titanium silencer
Full Akrapovič exhaust system with titanium header
10 L
9.8 L
Shared specifications
For further information on the MY26 Sherco EnduroGP Replica range, customers are encouraged to contact their nearest authorised Sherco dealer or visit www.sherco.com.au





